Zvizzer Marine Cut & Shine 4000 | Gelcoat Cutting Compound

Zvizzer Marine Cut & Shine 4000 - Cut and Gloss Gelcoat in One Step

Marine Cut & Shine 4000 combines strong cutting power and high-gloss finishing in a single product, correcting gelcoat and marine paint in a true one-step process.

It removes heavy oxidation, scratches and sanding marks while bringing the surface up to a mirror-like shine at the same time, so you cut and refine in one pass rather than two. Across the large surfaces a boat presents, that gives you a real saving in time and effort.

The result is dramatically improved clarity and gloss, from a water-based formula that keeps dusting minimal and heat low even over big topsides and hulls. It is slow drying, giving you the working time large panels need, and wipes off cleanly when you are done. Water-based and eco-conscious, it is safe on all marine topcoats and gelcoat finishes, and can be used with wool or foam pads. 750ml.

One step, cut and gloss, more boat done in less time.

Application

Marine Cut & Shine 4000 works with both rotary and orbital dual action machines. Pair it with the green hard marine pad, microfibre pad or a wool pad, prime and apply a small amount to the pad or the surface before spreading to cover your working area.

On a rotary, spread at around 650 rpm, then work up to 1500 rpm under moderate pressure. On an orbital, spread on speed 1 and work up to speed 5. Either way, work one section at a time.

Being slow drying, it stays workable across large marine surfaces and wipes off easily. Keep two or three pads in rotation and swap them between sections to hold the finish consistent.

Works well with

• Green Hard Marine Pad - the hard pad for one-step cutting and gloss on gelcoat
• Zvizzer Marine Top Finish 2000 - lift the gloss further for a show finish
• Zvizzer Marine UV Shield 1000 - seal and protect the finish against UV
• Pro Microfibre - lint-free cloths for a clean wipe-off