Zvizzer Thermo Allrounder Pad Red - Hard Cutting Pad

Zvizzer Thermo Allrounder Pad Red - The Heavy-Cut Pad for Serious Paint Correction

The Red Allrounder is the heavy-cut pad in the range, the one you reach for at the start of any serious correction. Its firm foam backs a heavy cutting compound with real support, clearing deep scratches, heavy swirls and oxidation in fewer passes than a medium pad can manage. It is the workhorse of paint correction: enough cut to make fast progress on neglected paint, with a flat, even face that keeps your defect removal consistent panel to panel.

As an Allrounder it earns its name, running equally on rotary and orbital machines so it fits whatever your process demands. It is built on Zvizzer's thermo foam, staying thermostable where ordinary hard pads warm up and go soft, which holds the cut steady through long correction sessions and gives the pad several times the working life of standard foam. An inner hole at the centre eases the stress on the foam as you polish, and in the smaller sizes it refines spots and recesses a larger pad cannot. Use it as your first cutting stage, then drop down through the colours to refine.

Fast, controlled cutting when paint needs bringing back.

Application

The Red Allrounder runs on both rotary and orbital machines. Fit it to a clean backing plate and prime the face lightly with your compound before the first set.

Dispense an amount to suit the pad size and your working area, then spread it over the section before bringing the machine up to working speed. Work in firm, overlapping passes and let the compound cut before moving on.

Keep the face clean as you go, since a loaded pad loses its bite. Have two or three pads on rotation and let each cool between sets to hold a consistent cut. Rinse in warm water or a pad cleaner and air-dry.

Works well with

• Zvizzer HC 4000 Heavy Cut - the colour-matched cutting compound this pad is built for, for deep scratches and heavy swirls
• Orange Allrounder Pad - step down to the medium pad to refine once the heavy cutting is done, or down to Yellow with FC2000 to refine 
• Zvizzer Microfibre Cloths - colour-coded, lint-free cloths for a clean wipe-off with no cross contamination