Professional HR 6000 Hologram Remover 750ml

Zvizzer HR 6000 - The Flawless, Hologram-Free Final Finish

HR 6000 is the finishing stage of Zvizzer's Professional Bodyshop Line, developed to remove P6000 sanding marks and every last hologram. It uses the same highly homogeneous aluminium oxide as the rest of the line, with much smaller abrasive particles, lifting fine scratches and buffer trails to leave a flawless, high-gloss finish. This is the pass that makes fresh paint look perfect.

HR 6000 is built to finish more efficiently than a traditional bodyshop polish. Its higher lubrication gives you extra control and a longer working time on the final pass, where consistency matters most, and it stays dust-free and wipes off cleanly. With no fillers, the gloss you see is genuine, refined paint, not a temporary glaze. Water-based and silicone-free to make it bodyshop safe.

No holograms, no fillers, just a flawless finish.

Application

HR 6000 is built for both rotary and orbital dual action machines. Start with a clean pad and prime it, then pair it with the ultra soft black Zvizzer Professional pad, its colour-matched partner in the system. Apply a small amount to the pad or the panel and spread to cover your working area.

On a rotary, spread at around 650 rpm, then work up to 1500 rpm under light to moderate pressure. On an orbital, spread on speed 1 and work up to speed 5. Either way, work one section at a time.

The higher lubrication gives you extra control and an easy wipe-off. Keep two or three pads in rotation and swap them between sections to hold the finish even.

Works well with

• Black Pro Thermo Pad - the colour-matched ultra soft finishing pad for HR 6000
• Black Pro Microfibre - the black cloth in the professional system, matched to HR 6000
• Zvizzer OS 3000 One Step - the one-step system to run before final hologram removal
• Zvizzer Clean & Gloss - final spray to lift oils and dust and lift the gloss