Zvizzer Marine One Step 3000 | Gelcoat One-Step Polish 750ml

Zvizzer Marine One Step 3000 - One-Step Correction and Gloss for Gelcoat

Marine One Step 3000 corrects and finishes gelcoat and marine paint in a single stage, removing light to medium oxidation and surface defects while leaving an excellent gloss.

It is the efficient middle ground of the Marine Line: enough cut to clear everyday wear and weathering, with a finish fine enough to coat over with a sealant. For maintained boats and lighter correction, a quick pass is all it takes.

The water-based formula keeps dusting and heat low across the large areas marine work involves, and wipes off cleanly. It is slow drying, so it stays workable over big panels in the sun rather than flashing off before you have worked it. Water-based and eco-conscious, it is safe on gelcoat and marine topcoats and kinder to the marina environment. Seal the result with UV Shield for lasting protection. 750ml.

Quick to use, scratch free and glossy, ready to protect.

Application

Marine One Step 3000 works with both rotary and orbital dual action machines. Pair it with the 180mm blue medium marine pad, apply a small amount to the pad or the surface, and spread to cover your working area.

On a rotary, spread at around 650 rpm, then work up to 1400 rpm under moderate pressure. On an orbital, spread on speed 1 and dial up to speed 5. Either way, work one section at a time.

Being slow drying, it stays workable across large marine surfaces and wipes off easily. Keep two or three pads in rotation and swap them between sections to hold the finish consistent.

Works well with

• Blue Medium Marine Pad - the medium pad for one-step correction on gelcoat
• Zvizzer Marine Top Finish 2000 - refine to a deeper gloss when you want more wow
• Zvizzer Marine UV Shield 1000 - seal and protect the finish against UV
• Pro Microfibre - lint-free cloths for a clean wipe-off