Zvizzer UC 1000 | Ultrafine Cut Compound & Sealant

Zvizzer UC 1000 - The Finishing Polish That Seals As It Shines

UC 1000 is Zvizzer's ultrafine cut polish with an integrated ceramic sealant, the final step that perfects the gloss and protects it in a single pass.

Latest-generation micro-fine aluminium oxide removes the very finest micro-scratches without hazing or adding swirls, bringing paint to a deep, wet-look, 100% hologram-free finish. Then the sealant goes to work.

Built into the formula is a polymer emulsion that seals and protects the paint for several months, so your last polishing stage doubles as a layer of protection. Because that sealant bonds to the surface, UC 1000 is for fully cured paint only. It leaves a slick, glass-smooth finish that is ready to enjoy straight away, or to layer a dedicated coating over for even longer protection.

The last polish your paint needs, and the first layer of protection.

Application

UC 1000 works with both rotary and orbital machines, and a dual action orbital is ideal for laying down an even final finish. Start with a clean pad and prime it before your first pass. Apply a small amount of compound to the pad or the panel and spread to cover your working area.

On a rotary, spread at around 650 rpm, then finish at roughly 1,200 rpm under light pressure to refine and seal. On an orbital, spread on speed 1 and work up to speed 5. Either way, work one section at a time.

Keep two or three pads on the go and swap them between sections. Letting each pad cool holds the finish even and the gloss consistent. Available in 250ml and 750ml.

Works well with

• Green Thermo Allrounder Pad - the colour-matched ultra soft finishing pad for UC 1000
• Zvizzer FC 2000 Fine Cut - remove any holograms first, then seal and finish with UC 1000
• Zvizzer Allround Shampoo - safe on the sealant layer, so your protection lasts longer
• Zvizzer Microfibre Cloths - colour-coded, lint-free cloths for a clean wipe-off and no cross contamination